|
 |
| • Monforts DNC 5 (turning and milling machine) |
| TECHNICAL DATA |
|
| • Load magazine with small bars |
|
| • Traverse Z1/Z2: |
600/600 mm |
| • Traverse X1/X2: |
260/260 mm |
| • Max. swing diameter: |
560 mm |
| • Spindle nose nach DIN 55026: |
A8/A8 |
| • Max. bar capacity: |
85/85 mm |
| • Drive power (100 % / 40 % ED) with Fanuc: |
21/31,5 kW |
| • Drive power (100 % / 40 % ED) with Siemens: |
21/31,5 kW |
| • Rotational speed range with Fanuc: |
32-4000 /min |
| • Rotational speed range with Siemens: |
32-4000 /min | |
|
|
| • Hermle C40 U Dynamik 5-Achs (milling machine) |
| TECHNICAL DATA |
|
| • Traverse: |
|
| Traverse X-axis: |
850 mm |
| Traverse Y-axis: |
700 mm |
| Traverse Z-axis: |
500 mm |
| • Spindle tool: |
|
| Rotational speed 18000 1/min: |
HSK A 63 |
| • Tool store: |
|
| Store space: |
78 |
| • Control system: |
|
| Heidenhain: |
iTNC 530 |
|
|
|
| • KEL VARIA (circular grinding machine) |
Circular grinding center
 |
TECHNICAL DATA |
|
| • Grinding length: |
1500 mm |
| • Center height: |
225 mm |
| • Weight of work piece between Centers: |
150 Kg |
| • External grinding |
|
| • Internal grinding |
|
| • inclined cut grinding |
|
| • C-Axis for noncircular grinding |
|
| • Wind grinding |
|
| • Cylinder with conical transition completely automatic |
| • Measuring control |
|
| • Measuring system for grinding plate |
|
| • Work piece edge searching by measuring system |
|
|
|
|
| • Gildemeister NEF 520 (Turning machine) |
| TECHNICAL DATA |
|
| • Swing diameter over bed: |
500 mm |
| • Cross travel X: |
260 mm |
| • Center course: |
1500 mm |
| • Rotational speed range until: |
3000 /min |
|
|
|
| • DMG CTX 420 Linear (turning and milling machine) |
| TECHNICAL DATA |
|
| • Load magazine with small bars |
|
| • Work area: |
|
| Max. swing diameter: |
680 mm |
| Swing diameter above cross guide way: |
565 mm |
| Cross travel (X): |
260/185 |
| Vertical travel (Y): |
± 40 mm |
| Longitudinal travel (Z): |
620 mm |
| • Main spindle: |
|
| Bar capacity: |
65 mm |
| Chuck: |
250 mm |
| Rotation speed range: |
20 - 5.000 / min |
| • Counter-spindle: |
integr. spindle drive |
| • Rotation speed range: |
20 - 7.000 / min |
| • Tool mount: |
|
| Number of tool stations: |
12 |
| of these, driven tool stations: |
12 | |
|
| • IA 3 TLF U (deep hole boring and milling machine) |
| TECHNICAL DATA |
|
|
Deep hole diameter with deep hole drills |
4 to 32 mm |
|
Maximum deep hole in one time |
max. 1150 mm |
| Bigger deep holes possible by cutting back |
|
| Milling |
250 cm3 / min |
| Spindle |
ISO 40 (HSK 63) DIN 69871 |
| Spindle speed |
60 - 6000 min-1 |
| Spindle capacity |
7,5 (13) kW |
| All capacity data for material 1.2311 |
|
| |
|
|
• 5 CNC axes: |
|
| W Drilling/ Milling unit, horizontal |
1650 mm |
|
X Table cross travel |
1800 mm |
|
Y Drilling/ Milling unit, vertical |
1200 mm |
|
Z Tower length |
1700 mm |
| B Round table |
360° |
| A Drilling/ Milling unit pivoting |
-25 bis +15° |
| |
|
|
Table surface |
1500 x 1000 mm |
| Charge admissible on table |
7000 / 10000 kg |
| |
|
| • 3D Continus path control |
HEIDENHAIN iTNC 530 |
| |
| |
|
